Power and Mount
Instructions for powering up your Bee and properly mounting on or inside your vehicle.
Powering Up
Find your car’s 12V outlet (often near the dash or console).
Plug in the included adaptor.
Connect the cable to the Bee’s Power port (underside of device).
LED for Power
Solid or slow red pulse (over 4 seconds)
✅ Power is good
No light
❌ No power
Fast blinking / mismatch
⚠️ Check power source / short condition
The Bee is designed to be powered using a 12 volt accessory outlet. While the Bee may be powered using a USB-C charging port, not all vehicles supply enough power to these ports to successfully power the Bee.
Do not exceed 20V. Use only the included adapter. Some vehicles output >20V; check your car manual before installation.
Approved Vehicle Types
Vehicles with at least four wheels 🚗 🚛 🚕
Vehicles that don't have four wheels 🛵 🏍️
Approved Vehicles Mount Positions
Forward Facing Only
High-quality usable imagery begins with great mount positions. There are currently two approved mount positions (as shown below).
Example Approved Mounts
Your Bee is powered and mounted. You’re now ready to Connect and Activate in the next step.
Last updated