Assemble
Unbox your Bee and assemble the core hardware components.
Unboxing the Bee
What's in the box:
Before you begin, check that you have all parts listed above.
Bee Assembly
1
Locate the mounting threads on top of the Bee.
2
Lift both sides of the mounting bracket.
3
Place the bracket on the Bee, aligning holes with threads.
4
Secure with 2 small screws using the small Allen key.
5
Tighten with the large screw using the large Allen key.
6
Lower the magnetic sides of the bracket.
7
Remove the thumbscrew from the suction mount.
8
Slide the mount prongs into the bracket.
9
Align holes and secure with the thumbscrew.
Hold the opposite cap to prevent it from loosening.
🎉 Congratulations! Your Bee is assembled and mounted. Next, go to Insert SIM to power it up and connect.
Last updated