Mount your Bee

Instructions for powering up your Bee and properly mounting on or inside your vehicle

Powering up

1. Locate the 12 volt accessory outlet in your vehicle

2. Plug in the included outlet adaptor

3. Locate the power port on the underside of the Bee and plug in the other end of the cord

LED for Power

LED for Power	What it Means
🔴 Solid Red	✅ Power is Good
🔴 Breathing Red Flicker (over 4 seconds)	✅ Power is Good
No Red	❌ No Power
Short Red Flicker (1 second on 1 second) off	❌ Power mismatch and will not power
Quick Flicker (300ms on 300ms off)	❌ Short condition in Bee

The Bee is designed to be powered using a 12 volt accessory outlet. While the Bee may be powered using a USB-C charging port, not all vehicles supply enough power to these ports to successfully power the Bee.

The Bee accepts a maximum direct voltage of 20V, which is safely provided with the included power adapter. Some vehicles output more than 20V through accessory outlets. Damage to the Bee may occur if powered at greater than 20V. Reference your vehicle’s owner’s manual to confirm the voltage of your outlets and charging ports prior to installation.

Approved vehicles mount positions

✅ = 🚘 🚛

Vehicles with at least four wheels are currently approved including cars, vans and trucks of all sizes.

❌ = 🏍️

Vehicles that do not have four wheels are not approved at this time. This includes: bicycles, e-bikes, scooters, motorcycles.

Forward Facing Only

• High-quality usable imagery begins with great mount positions. There are currently two approved mount positions (as shown below).

Front facing only — interior or exterior

Example Approved Mounts