Unbox your Bee and assemble the core hardware components.
Before you begin, check that you have all parts listed above.
Locate the mounting threads on top of the Bee.
Lift both sides of the mounting bracket.
Place the bracket on the Bee, aligning holes with threads.
Secure with 2 small screws using the small Allen key.
Tighten with the large screw using the large Allen key.
Lower the magnetic sides of the bracket.
Remove the thumbscrew from the suction mount.
Slide the mount prongs into the bracket.
Align holes and secure with the thumbscrew.
Hold the opposite cap to prevent it from loosening.
🎉 Congratulations! Your Bee is assembled and mounted. Next, go to Insert SIM to power it up and connect.
Last updated 4 months ago
